The Farid Hillend Engineering container washers are the result of over twenty years experience by the Farid European Group in the manufacturing of bin washing equipment. This experience is complemented with the most recent innovative technological advancements in the fields of electronics, hydraulics and new materials
The range of Farid Hillend Engineering container washer equipment is continually developing following research into customer expectations:
reliability, ease of operation, high performance and modern design.
TankClean water tanks and dirty water collection tanks are made of AISI 304 stainless steel. A modular tank in polyethylene* is also available on some models, as shown on the table on page 3, this material ensures long lasting reliability, lightweight structure and reduced whole of life costs.
- Range of sizes from 7.5 to 18 tonne GVW
- Hot and/or Cold wash
- Small, compact and very manoeuvrable, an ideal solution where restricted access is a problem and excellent manoeuvrability is required
- Stainless steel Farid Hillend Engineering comb bin lift fitted as standard - Capable of handling all EN standard bins from 120 litres to 1100 litres capacity
- Totally enclosed stainless steel washing chamber
- Water storage divided into two chambers (Clean & Dirty)
- Residual waste (slurry) containment sump
- Ability to wash containers (bins) internally and/or externally
- Variable wash cycle time
The container (bin) is washed inside a totally enclosed stainless steel chamber. As a result of its large volume water tanks, the vehicle provides for the washing of a high number of containers (bins) without any service interruption. A stainless steel sump grill allows slurry to be captured and the residual water diverted to the dirty water tank located inside the body.
The slurry, which is contained in a full width fully sealed sump within the washing chamber, is easily and quickly unloaded.
Fixed or automated* stainless steel fan nozzle washer jets are fixed onto the side walls of the internal washing chamber to wash the containers (bins) external surfaces and lids.
A) Mini container washers
The internal wash is made by two rotating and oscillating heads, activated by hydraulic motor.
The wash can be made with cold or hot water generated by a boiler and a 24 V burner.
B) Standard container washers
Various washing systems are available, depending on specific needs. In the standard versions the equipment performs the internal wash followed an external wash of the container (bin). A further option with an auxiliary motor and a second high-pressure pump allows the internal and external wash to be conducted at the same time.
Containers (bins) are washed inside the totally enclosed stainless steel washing chamber by two rotating and oscillating heads, equipped with five nozzles. The special nozzle shape and the combined action of jets effectively remove the fouling from inside the container (bin).
The equipment can wash with cold or hot water produced by 24 V burners and boilers using weldless steel coils. Water heating systems are equipped with safety valves to prevent overpressure and flame extinction.
Stainless steel Farid Hillend Engineering bin lift
This equipment is available with different devices to handle the refuse collection containers (bins): lifting devices for 120 to 1,700-litre containers (120 to 1,100 litres on Mini version), compatible with various hooking systems available on the market.
The electrical system, designed and implemented by Farid European Group, facilitates the activation of all equipment commands and is controlled by a programmable logic controller (PLC).
- Fully degreased & primed body finished in two pack water based paint
- Lighting in compliance with Construction & Use regulations